Epson SQ-2550 User Manual page 265

ESC $
Format:
ASCII code:
Decimal:
Hexadecimal: 1B
Comments:
This sequence specifies the distance from the left margin that
subsequent characters are to be printed, using this formula:
total number of dots = nl + (n2 x 256). Each unit equals
1/60th of an inch. The sequence is ignored and the previous
setting remains effective if the position specified is beyond
the right margin.
ESC \
Format:
ASCII code:
Decimal:
H e x a d e c i m a l : 1 B 5 C n l n 2
Comments:
Determines the position (relative to the current position) at
which printing of following data will start. To find nl and
n2, first calculate the displacement required in dots. If the
displacement is to the left, subtract it from 65536. Send the
resulting number using this formula: total number of dots =
nl + (256 x n2).
The command is ignored if it would move the print position
outside the current margins. A unit is l/120th of an inch in
draft, and 1/180th of an inch in Letter Quality or
proportional.
ESC $
nl
27 36
n1
24
nl
ESC \
nl
27 92
nl
Set Absolute Print Position
n2
n2
n2
Set Relative Print Position
n2
n2
Command Summary 9-21