Epson SQ-2550 User Manual page 81

Operating the Control Panel
PITCH:
PAPER SELECT:
3-6 Using the Printer
Press this button to select the
character spacing. You can choose
10, 12, 15, 17 or 20 cpi (characters
per inch) or I'S (Proportional). The
selected character spacing is shown
on display. See the section on
the
character spacing in this chapter for
more information.
When the printer is in SelecType
mode, this button is used to change
the SelecType settings as a
button.
When the printer is off line, press
this button to select the paper
handling system. The selected
system is shown on the display.
The paper handling system is
selected in the following order:
Select CSF bin 1 or CSF bin 2 only if
using the optional cut sheet feeder.
When the printer is in SelecType
mode, this button is used to change
the SelecType settings as a
button.
SELECTION
MENU