Adjusting The Loading Position - Epson SQ-2550 User Manual

Adjusting the Loading Position

Adjusting the loading position
To adjust the loading position, follow these steps:
1. Load your paper.
2. Press the
MICRO FEED
The display shows
form).
3. Press the button A to feed
to feed the paper backward.
Note: The printer beeps when the paper reaches a position
that is approximately 8.5 mm from the top edge of the paper.
You can use this position as a reference point when adjust the
printer's loading position.
3-22 Using the Printer
button (the A button or
(TOF stands for top of
TOF ADJUST
paper forward or the button
the
button).