Service Error Message Table - Lexmark Optra Color 1200 Service Manual

5050-001

Service Error Message Table

Message
900 Software Error
910 Motor Error
DC Drive 1 Motor Failure
918 Fan Error
Main Body Fan Alarm
Fan Error
919
Power Supply Fan Alarm
2-4
Service Manual
Unrecoverable software error. Refer
to the operator manual.
1. Be sure motor connector CN501
is connected properly to the PC
motor drive (1).
2. Be sure printer controller board
connector CN105 is connected
properly.
3. Be sure there is no abnormal load
on the toner or drum unit.
4. Replace the toner unit or the drum
unit if necessary.
5. Replace the DC motor (drive 1)
(11G0256).
6. If you still have a problem, go to
the "Drive 1 DC Motor Service
Check" on page
1. Be sure motor connector CN115
is connected properly on the
printer controller board
(11G0323).
2. Replace the fan if necessary.
3. If you still have a problem, replace
the printer controller board.
1. Be sure motor connector CN116
is connected properly on the
printer controller board.
2. Replace the fan (11G0322).
3. Replace the printer controller
board (11G0324).
2-28.