Lexmark Optra Color 1200 Service Manual page 63

5050-001
84 Color PC Life
Warning
84 Black PC Drum
Exhausted
This message alerts you that you can print
approximately 100 pages before the
message appears. If you do not have new
Exhausted
color photoconductors, order them now.
The cyan, magenta, and yellow photoconductors come
packaged together. You cannot order them separately.
Press to clear the message and continue printing.
Go
The status message is then displayed with
Supplies
the ,
Ready Power Saver
messages—unless another status message of higher
priority is posted—until you replace the
photoconductor.
If this message does not reset after replacing all
photoconductor units, clean or replace the drum
sensor (11G0548) in the right sub frame.
The black photoconductor has reached the end of its
13,000-page life. You may want to replace the
photoconductor now.
If the print quality is still acceptable, press
the message and continue printing. The
status message is then displayed with the
,
Power Saver Busy
another status message of higher priority is posted—
until you replace the photoconductor.
When you replace the black photoconductor, make
sure you also install the new fuser coating roll that is
included in the black photoconductor kit.
If this message does not reset after replacing all
photoconductor units, clean or replace the drum
sensor (11G0550) in the right sub frame.
Color PC Drums
, and
Busy Waiting
and messages—unless
Waiting
Diagnostic Information
to clear
Go
Supplies
,
Ready
2-21