Lexmark Optra Color 1200 Service Manual page 62

5050-001
70–79 Network
80 Scheduled
Maintenance
84 Black PC Life
Warning
2-20
Service Manual
Reserved for messages relating to the optional
internal network adapter (INA) installed in your printer.
For more information, refer to the online
documentation included on the printer CD under
"Network Printing."
The printer requires replacement of routine
maintenance items, such as the fuser, transport belt,
and roller set to maintain top performance and avoid
print quality and paper feed problems. These items are
in a maintenance kit available from Lexmark. You must
have a trained service technician install the
maintenance kit.
The message appears when the printer maintenance
counter determines 100,000 pages have printed.
Failure to replace the maintenance kit items will not
interrupt printer operation, but can result in
unsatisfactory printer performance.
This message alerts you that you can print
approximately 100 pages before the
message appears. If you do not have a
Exhausted
black photoconductor kit, order it now.
Press to clear the message and continue printing.
Go
The status message is then displayed with
Supplies
the Ready , Power Saver
messages—unless another status message of higher
priority is posted—until you replace the
photoconductor.
If this message does not reset after replacing all
photoconductor units, clean or replace the drum
sensor (11G0550, black) in the right sub frame.
Black PC Drum
, Busy and Waiting