Lexmark Optra Color 1200 Service Manual page 59

5050-001
52 Flash Full
53 Unformatted
Flash
54 Parallel Error
54 Parallel Option x
Error
There is not enough space available to hold the
resources you want to store in flash memory.
• Press to clear the message and continue
Go
processing. Downloaded fonts and macros not
previously stored in flash memory or disk are
deleted.
• Reset the printer. Press
Menu is displayed. Press
Reset Printer appears on the second line. Press
.
Select
The flash memory installed in your printer has not
been formatted. You must format the flash memory
before downloading resources.
Press to clear the message. To format flash
Go
memory, select Format Flash from the Tests Menu.
The printer has detected a protocol error on the
standard parallel interface. Check the cable
connection between the printer and the computer, and
make sure the cable is not defective.
• Press to clear the message and continue
Go
printing. The job may not print correctly.
• Reset the printer. Press
Menu is displayed. Press
Reset Printer appears on the second line. Press
.
Select
The printer has detected a protocol error on the
specified parallel interface. Check the cable
connection between the printer and the computer, and
make sure the cable is not defective.
to clear the message and continue
• Press Go
printing. The job may not print correctly.
• Reset the printer. Press
Menu is displayed. Press
Reset Printer appears on the second line. Press
Select.
or
Menu> <Menu
or
Menu> <Menu
or
Menu> <Menu
Menu> or <Menu
or
Menu> <Menu
or
Menu> <Menu
Diagnostic Information
. The Job
until
. The Job
until
. The Job
until
2-17