Lexmark Optra Color 1200 Service Manual page 56

5050-001
Load tray
Load Manual
Remove Paper
Top Output
2-14
Service Manual
The printer is trying to feed paper from a source it
detects is empty (tray 1, 2, 3, or the multipurpose
feeder). The message displays either the custom
media name defined using the MarkVision utility, the
media size, or the media size and type it is looking for.
To clear the message:
• Load media of the requested size and type in the
tray indicated.
• If you're printing on larger paper, make sure the Size
Detection setting is correct.
• Cancel the print job. Press
Job Menu is displayed. Press
Cancel Job appears on the second line. Press
Select.
Go to the "Paper Low/Empty Tray 1, 2, 3 Service
Check" on page
• You have sent a request for a manual feed job to the
printer, and the printer is ready for you to insert a
single sheet or envelope into the multipurpose
feeder. The message displays either the custom
media name defined using the MarkVision utility, the
media size, or the media size and type it is looking
for.
To clear the message:
• Load media of the requested size and type in the
multipurpose feeder.
• Press Select or Go to ignore the manual feed
request and print on media already installed in one
of the paper sources. If the printer finds a tray that
has media of the correct size and type, it feeds
media from that tray. If the printer cannot find a tray
with the correct media size and type, it prints on
whatever media is installed in the default paper
source.
• Cancel the print job. Press
Job Menu is displayed. Press
Cancel Job appears on the second line. Press
Select.
The top output bin is full. Remove the stack of paper
and press .
Go
Go to the "Remove Paper Sensor Service Check"
on page 2-36.
Menu>
Menu>
2-35.
Menu>
Menu>
or . The
<Menu
or until
<Menu
or . The
<Menu
or until
<Menu