Lexmark Optra Color 1200 Service Manual page 61

5050-001
56 Parallel Port x
Disabled
56 Serial x Port
Disabled
61 Defective Disk
62 Disk Full
63 Unformatted
Disk
Data was sent to the specified parallel port, but the
port has been disabled from the Parallel Buffer menu
item.
• Press to clear the message. The printer discards
Go
the data sent to the parallel port.
• Reset the printer. Press
Menu is displayed. Press
Reset Printer appears on the second line. Press
Select.
Data was sent to the specified serial port, but the port
has been disabled from the Serial Buffer menu item.
• Press to clear the message. The printer discards
Go
the data sent to the serial port.
• Reset the printer. Press
Menu is displayed. Press
Reset Printer appears on the second line. Press
Select.
The hard disk installed in your printer is defective.
Press to clear the message and continue printing.
Go
You must install a different disk before you can perform
any disk functions.
There is not enough space available to hold the
resources you want to store on disk.
• Press to clear the message and continue
Go
processing. Downloaded fonts and macros not
previously stored in flash memory or disk are
deleted.
• Reset the printer. Press
Menu is displayed. Press
Reset Printer appears on the second line. Press
Select.
The hard disk installed in your printer has not been
formatted. You must format the disk before you can
download resources to it.
Press to clear the message. If the error message
Go
remains, the disk may be defective and need
replacing.
To format the disk, select Format Disk from the Tests
Menu.
or
Menu> <Menu
or
Menu> <Menu
or
Menu> <Menu
or
Menu> <Menu
Menu> or <Menu
or
Menu> <Menu
Diagnostic Information
. The Job
until
. The Job
until
. The Job
until
2-19