Lexmark Optra Color 1200 Service Manual page 135

5050-001
3. Push the latch to lift the top cover, remove the 5 black mounting
screws and remove the top cover.
4. Remove the second paper cassette connector cover on the
bottom of the rear cover.
5. Remove the rear paper exit tray if it is installed.
6. Remove the 2 rear paper exit tray mounting studs.
7. Remove the 3 silver screws from the upper latch and rear cover.
8. Lift the cover over the top latches and lift back.
9. Loosen the cable tie and remove the face-down stacker sensor
harness connector if it is installed.
Repair Information
4-17