Service Error Message Table - Lexmark Optra SC 1275 Service Manual

Attendance Message
Insert <tray>

Service Error Message Table

Error Symptom or Message
900 Software Error
910 Transport Motor (M2) Failure
911 Developing Motor (M1) Fail-
ure
912 Toner Cartridge Rack Motor
(M3) Failure
913 Transfer Roller Error
914 Intermediate Transfer Belt
2-26
Action
This message is displayed when the
printer needs to select print material
from a missing tray. Often the mes-
sage is displayed when a user
removes a tray to refill it while a job
is printing.
<tray>is Tray 1 or Tray 2.
• Press Stop and wait for all pages
in the buffer to print.
• Insert the tray indicated.
The printer clears the message
and resumes printing.
Or, to reset the printer:
• Press <Menu> to access the
Busy menu.
• Select Reset Printer.
Action
Unrecoverable software error.
Refer to the operator manual.
Go to the "Transport Motor Ser-
vice Check" on page 2-34.
Go to the "Developing Motor Ser-
vice Check" on page 2-34.
Go to the "Toner Cartridge Rack
Service Check" on page 2-38.
The printer fails to completely
transfer the image to the paper or
does not transfer it at all.
The image transfer roll does not
lift when paper is passing over it.
Go to the "Image Transfer Belt
Service Check" on page 35.