Lexmark Optra Color 1200 Service Manual page 60

5050-001
54 Serial Option x
Error
54 Std Par ENA
Connection Lost
54 Par x ENA
Connection Lost
56 Std Parallel Port
Disabled
2-18
Service Manual
The printer has detected a protocol error on the
specified serial interface. Make sure the serial
interface parameters are set up correctly and you are
using an appropriate serial cable.
• Press to clear the message and continue
Go
printing. The job may not print correctly.
• Reset the printer. Press
Menu is displayed. Press
Reset Printer appears on the second line. Press
.
Select
An external network adapter (ENA) that was once
connected to the standard parallel port is no longer
responding. The printer only recognizes the missing
connection when the printer power is first turned on.
• Make sure the cable connecting the ENA and the
printer is securely attached. Turn the printer off and
then on again to see if the printer recognizes the
connection.
• Press Go to clear the message. The printer erases
any reference to the ENA and then resets.
An external network adapter (ENA) that was once
connected to the specified parallel port is no longer
responding. The printer only recognizes the missing
connection when the printer power is first turned on.
• Make sure the cable connecting the ENA and the
printer is securely attached. Turn the printer off and
then on again to see if the printer recognizes the
connection.
• Press Go to clear the message. The printer erases
any reference to the ENA and then resets.
Data was sent to the standard parallel port, but the
port has been disabled from the Parallel Buffer menu
item.
• Press to clear the message. The printer discards
Go
the data sent to the parallel port.
• Reset the printer. Press
Menu is displayed. Press
Reset Printer appears on the second line. Press
Select.
or . The Job
Menu> <Menu
or
Menu> <Menu
or . The Job
Menu> <Menu
or
Menu> <Menu
until
until