Lexmark Optra Color 1200 Service Manual page 127

5050-001
Summary Notes:
X and Y values are taken from the left side. Theta is taken from the
right.
Increasing values for X drives the color radar right. Increasing values
for Y and Theta drive the color radar image down the page.
Do both the X and Y before attempting Theta.
Use a loop or magnifying glass to make the job easier.
Yellow is very difficult. When you make the yellow adjustment, swap
the cyan toner cartridge and photoconductor with the yellow
cartridge and photo conductor. Run through the procedure making
the correct adjustments to the yellow X, Y and Theta adjustment.
Remember to swap the supplies position back to the correct position
when you finish.
4-9
Repair Information