Using The Front Panel Copier Menu - Tektronix Phaser 840 Troubleshooting Manual

9
Using Your Printer with a Scanner

Using the front panel Copier Menu

116 Phaser 840 Color Printer
The printer allows you to control the settings listed in the table below. From the
printer's menu, scroll to Print Menu Map and press Select to print a Copier
Menu.
Copier menu Purpose
setting
Selects up to 999 copies. To change the desired number, press the
Copy Count
up or down arrows.
Press down and hold the up or down arrow to auto-increment the
value. Release the button when the desired number of copies is
displayed.
Selects the type of color reproduction from the following:
Color Mode
Color Image: For full-color images. The image is reproduced with
as accurate as possible color matching.
Color Text: For images with colored text, line art or charts. The
image is reproduced in full color, but text colors are accentuated
and scanning occurs at a higher resolution to maintain text
definition.
Grayscale: For copying or creating monochrome images. The
image is reproduced in shades of gray.
Black/White: The image is reproduced in full white and full black
only. Especially suitable for copying line drawings.
Lightens or darkens your prints on a scale of –10 (lightest) to
Lighten/Darken
+10 (darkest).
Brightens or increases the saturation of all colors or reduces the
Color
saturation on a scale of –10 (grayest) to +10 (most saturated,
Saturation
brightest). Zero, the default, is neutral.
Enlarges or reduces the size of the copy image up to 1000% of the
Zoom
original's image size, depending on your scanner. The default setting
is 100%. To change the scale value, press the up or down arrow key.
Press down and hold the up or down arrow key to auto-increment the
value. Release the button when the desired scale factor is displayed
and press
For additional information on using the scaling function to enlarge
and reduce copies, refer to "Placing and scaling images" on
page 118.
Selects the size of your original image or input.
Original Page
Size
The options available (for example, Letter, Legal, Tabloid, A3) will
depend on the scan area of your scanner.
Tray Size, the default selection, copies an area equal to the size of
the media in the selected tray.
Selects the media tray from which your copy or output will be printed.
Tray Selection
The options available will depend on the number of media trays in
your printer.
Changes the printer's copier menu default settings and saves your
Save Default
own settings for the kinds of copies you typically make.
Sets the defaults to the printer's original selections.
Reset Defaults
Select .