Protected Mode For The Front Panel Menu - Tektronix phaser 850 Advanced Features And Troubleshooting Manual

Troubleshooting Phaser 850 Printers

Protected mode for the front panel menu

System administrators can control user access to the front panel menus with PhaserLink
Software or the following utility files (refer to page 23 for instructions on downloading
utility files):
Macintosh utility files
I
Menu Short (limits menu access)
I
Menu Long (expands menus)
PC utility files
I MENUSHRT.PS (limits menu access)
I MENULONG.PS (expands menus)
The "short" utility files limit the menu items displayed on the front panel, preventing
users from changing front panel settings that may affect the prints of other users. Users
instead select printing features — such as color corrections — through their applications
only. In the protected mode, users can access all menus except the Default Printer
Settings, Advanced Printer Settings, and Network Settings.
The "long" utility files reset the front panel to display full menus and allow full access to
the settings.
If you used the Menu Short or MENUSHRT.PS files to limit the front panel menus, you can
temporarily restore the full menus:
1. When the Ready to Print message appears, scroll to Menu; press Select.
2. Scroll to Printer Configuration; press Select.
3. Hold down the left arrow and press Select. The Default Printer Settings and Network
Settings selections are added to the menu and are removed again when the Printer
Configuration menu is closed.
52 Phaser 850 Color Printer