Stylus Pro5000
10. Release various harness from 3 "Mini-cramp(small cramp)"s located at
the front side of "Frame, Main, Paper Eject". (Refer to Figure4-45)
11. Remove one CBS screw(3x6) securing "Tank, Absorber", and remove
"Tank, Absorber".
12. Remove 8 CBS screws(3x6) securing "Frame, Main, Paper Eject", and
remove "Frame, Main, Paper Eject".
(Refer to Figure4-46)
Rev. B
"Mini Cramp"
Figure 4-45. Releasing Harness at the front side of "Frame, Main, Paper
"Tank, Absorber"
CBS(3x6)
"Frame, Main, Paper Eject"
CBS(3x6)
Figure 4-46."Frame, Main Paper Eject" Removal
Chapter4 Assembly and Disassembly
Eject"
CBS(3x6)
4-25