Paper Eject Frame Unit Removal - Epson Stylus 1500 Service Manual

Stylus 1500 Service Manual

3.2.12.3 Paper Eject Frame Unit Removal

1. Remove the printer mechanism. (See Section 3.2.2.)
2. Remove the carriage unit. (See Section 3.2.12.2.)
3.
Remove 3 (CBS 3 6) screws securing the paper eject frame unit to the left frame, the right frame, and
the middle frame, and then remove the paper eject frame unit.
While removing the paper eject frame unit, insert a clean and soft paper towel between printhead
and the paper feed roller unit to protect the printhead nozzles.
Left Frame
Figure 3-21. Removing the Paper Eject Frame Unit
Rev.A
Paper Eject Frame Unit
Disassembly and Assembly
CBS 3 x 6
Middle Frame
Right Frame
3-21