Stylus Pro5000
5. Hang the one side of "Timing Belt, Hopper" on "Hopper Lock
Transmission Gear Assembly", and hand the other side on axis "A"
temporarily. (Refer to Figure4-89)
6. Install "Lifter Gear Train Cover Assembly" and attach a bush to the axis
of "Hopper Lock Transmission Gear Assembly".
7. Fix "Lifter Gear Train Cover Assembly" with 2 "E" shaped rings and 2
CBS screws(3x6). (Refer to Figure4-90)
Rev.B
Chapter4 Assembly and Disassembly
"Timing Belt, Hopper"
Axis "A"
"Hopper Lock Transmission Gear Assembly"
Figure 4-89. Fixing "Timing Belt, Hopper" Temporarily
"Lifter Gear Train Cover Assembly"
CBS(3x6)
Bush "E" shape ring
Figure 4-90. Installing "Lifter Gear Train Cover Assembly"
4-48