Stylus Pro5000
Step4.
Following screen appears.
Figure 5-32. Initial Screen for Stylus Pro5000.EXE
CAUTION
If this screen does not appear, following case
might be the reason.
Mode Command is not typed. (Refer to Step2)
Step5.
When PC reads the printer ID, the screen in the condition
which "Yes" is selected appears. Then, press Return key.
Step6.
Following screen appears.
Figure 5-33. Selecting "Adjustment" on the screen
Rev. A
Step7.
Select "Adjustment" and press Return key.
Step8.
Following screen appears.
Figure 5-34.Main Menu for Adjustment
Step9.
Select "Head Gap Timing Adjustment" and press Return key.
Step10.
Following screen appears.
Figure 5-35. Screen After Selecting the Head Timing Gap Adjustment
Chapter5 Adjustment
5-23