Epson Stylus Pro 5000 Service Manual page 184

Stylus Pro5000
Step22. After moving the lever position left or right side, return the
carriage to the home position manually. Following shows the
relation between the changing direction of the lever and
changes of printing pattern.
CAUTION
After changing the lever position, if the carriage is
not returned to the home position manually, the
printer acknowledges the carriage is out of home
position when the printer is turned on. Then, the
printer will go to the cleaning routine and waste
the time.
Lever for Left Head
Angular Adjustment
Figure 5-23.Condition that the Carriage is moved to notched parts
Rev. A
Lever for Right Head
Angular Adjustment
Table 5-8. Relation between the Lever Position and Changes of
Printing Pattern
No. Position of the lever for right
and left head angle
1 If it is moved to left direction
2 If it is moved to right direction
Figure 5-24. Changes of Printing Pattern After the Lever Position is
Chapter5 Adjustment
Changes of printing pattern
Refer to figure5-24(Bottom
figure)
Refer to figure5-24(Top figure)
changed
5-16