Epson Stylus Pro 5000 Service Manual page 183

Stylus Pro5000
Step17. Turn off the printer once.
Step18. Release the carriage lock manually. (Refer to figure below)
Figure 5-21. Forceful Release of Carriage Lock
Step19. Out of carriage lock lever(2 levers component), the upper
lever falls rear side automatically by pushing the lower lever
with driver. By this, the carriage can be moved freely by
hands.
WARNING
In order to release or set the carriage lock,
although it is possible to rotate the paper feed
driven (high precision) gear by hand, touching this
gear surface directly causes unstable paper feed
pitching. Therefore, if you need to rotate this gear,
do so, using 2 dimples on the gear surface.
Rev. A
Step20.
Down
Push
Step21.
Remove 3 screws securing the black frame with discharge
brush to the front case, and remove this frame. Then, 2
notched parts on the frame appear. They are the levers for
head angular adjustment. (Refer to figure below)
Fixing the frame part with discharge brush
Windows for changing the lever position
Figure 5-22. Positions of Discharge Brush and Windows for Changing
the Lever Position
In the out of 2 windows in the figure above, move the carriage
manually, until 2 levers for head angular adjustment
from the carriage appear.
Chapter5 Adjustment
5-15