Epson Stylus Pro 5000 Service Manual page 30

EPSON Stylus Pro 5000
T T
Maintenance Mode 1
Operation: Cleaning SW + Eject SW + Power ON to enter this
mode.
To change maintenance item:
Reset SW
Determine the selection(maintenance item):
Eject SW
Maintenance item and LED indicator:
I/F selection
Parallel input speed Cyan ink LED is on.
HEX dump Magenta ink LED is on.
Character set Yellow ink LED is on.
Function: 1)Cleaning SW + Eject SW+ Power ON to enter this
mode 2)Power LED blinks. Manual cassette(tray),
Cassette1 and 2 turn on 3)Ink LED indicates current
setting 4) Paper check, I/F selection, Parallel input
speed, Hex change is changed over everytime the
Reset SW is pressed.
Ink LED turn on in the order of left to right and returns
to left side.
[In case of pressing Eject SW]
1)Select item(Data registration) 2)Exit this mode 3)Enter each setting
mode.
CAUTION
Following explains setting of each item in the
maintenance mode selection.
Rev.A
Black ink LED is on.
T T
Select I/F mode(Cont1. from Maintenance mode)
Operation: After Eject SW + Power ON, turn the black ink LED
on by pressing Reset SW, and determine that
selection by pressing Eject SW.
To select I/F mode:
Reset SW(Parallel Serial Option)
Save setting:
Eject SW or Power off
Setting item and LED indicator:
Auto selection setting Black ink LED is on.
Parallel I/F mode Cyan ink LED is on.
Serial I/F mode Magenta ink LED is on.
Option I/F mode Yellow ink LED is on.
Function: 1)Select "Black" in maintenance mode to enter this
mode. 2)Power LED blinks. Cassette1 and 2 turn on
3)Ink LED indicates current setting.
Reset SW, Auto, Parallel, Option is selected in this
order. Ink LED moves left to right and return to left.
[After completing the setting, if power is turned off]
1)Save setting(Data registration)
to the power off condition.
[After completing the setting, if Eject switch is pressed
1)Save setting(Data registration)
to the ordinary printing mode(idle state).
Chapter1 Product Description
4)By pressing
2)Exit setting mode 3)Printer goes
2)Exit setting mode 3)Printer goes
1-20