Multifeeder Tray Pick-Up Roller - Canon CP660 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
11)Remove the three screws, and disen-
gage the two claws; then, disconnect
the connector, and detach the multi-
feeder pick-up assembly.
w
r
q
q Screws w Connector
e Claws
r Multifeeder pick-up assembly
Figure 5-625
5-44
COPYRIGHT © 1999 CANON INC.
Download free service manual at http://printer1.blogspot.com
e
CANON 660/2100 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
F. Multifeeder Tray Pick-Up
Roller
1. Removing the Multifeeder Tray
Pick-Up Roller
1) Open the right cover.
2) While pushing the holding plate and
the separation pads, pull out the mul-
tifeeder pick-up roller by holding the
knob on the roller.
q
q Holding plate
w Multifeeder separation pad
e Multifeeder pick-up roller
Figure 5-626
w
e