REP 5.1.6: Waste Ink Pads
Parts List: 3.1
1. Remove the following:
a.
REP 1.1: WorkCentre Cover on page 4-3
b. REP 2.1.18: Printer Assembly on page 4-24
2. Remove the three screws securing the insulator
plate to the main board. One screw is located
near the AC receptacle; the others on the main
circuit board. See Figure 4-48.
Remove these 2 screws also
Figure 4-48 Waste ink pad cover
3. Remove the insulator plate, and replace the 3 ink
absorbent pads.
Xerox WorkCentre 450c/450cp Service Manual
www.printcopy.info
Page 4-43