Connecting Handset; Mains Connection; Making Important Predetermined Settings; Language And Country Setting - Olivetti Fax-Lab 470 Instructions Manual

C
ONNECTING HANDSET
1. Lay the fax machine on its right side.
2. Insert the plug of the handset into the socket on the fax machine
with the symbol .
3. Fix the handset cable into the groove made for this purpose.
4. Replace the fax machine in its normal position.
5. Move it into its designated position.
M
AINS CONNECTION
1. Insert the connector of the power cable into the socket on the rear
of the fax machine.
2. Insert the mains plug into the mains wall socket.
NOTE
The fax machine will remain permanently connected, ready to
receive and send documents 24 hours a day. If you want to turn
it off, pull out the power cable plug from the wall socket as the
fax machine has no power switch.
M
AKING IMPORTANT PREDETERMINED SETTINGS
For the fax machine to work properly, set your language and
your country.
Once the fax is connected to the mains, it automatically runs a short
function test to check that its components are working and the
language in which the messages will appear is shown on the display.
L
ANGUAGE AND COUNTRY SETTING
The display shows the language in which the messages are
displayed. For example:
1. If the language displayed is not the desired one, press the
key:
/
For example:
2. To confirm the setting, press the key:
The display shows:
3. To confirm the setting, press the key:
The display shows the name of the country. For example:
4. If the country displayed is not the desired one, press the
key:
/
For example:
If your country is not present among those shown on the
display, see the table below:
3