Table of Contents
Advertisement
M
AKING A CALL
When you engage the line by lifting the telephone handset, you
may use all the telephone functions available on ordinary telephones
sold on the market.
These also include the R function (REGISTER RECALL, activated by
pressing the
key) which provides access to the special services
made available by the company that manages the telephone network.
You can also use the following functions:
•
Call the correspondent using the fast dialling procedures set, see
"Telephoning with one-touch dialling" and "Telephoning with
speed dialling".
•
Momentarily hold a telephone call by pressing the
key. The call is resumed as soon as the same key is pressed again.
•
Activate the "handsfree" function, by pressing the
or during a telephone call. This function is useful if you want other
persons at your end to take part in the conversation.
T
ELEPHONING WITH ONE
CASE 1
Do not place the original document in the ADF.
1. Press the desired numeric key, for example, for more than
one second (in example
-
The display shows the associated telephone number that
you stored (see "Setting one-touch and speed dialling",
chapter "Basic transmission and reception operations").
If a name was also associated with it, the display will show
this, too.
2. Once the number has been dialled, if the correspondent is
free, you can lift the handset and start talking.
The display shows the length of the call in minutes and
seconds in the top right-hand corner.
NOTe
If you want to activate the "handsfree" function, having raised the
handset, press the
key. The display shows:
24
(HOLD)
key before
-
TOUCH DIALLING
):
CASE 2
Do not place the original document in the ADF.
1. Lift the handset to engage the line.
or
to activate the handsfree function, press the key:
The display shows:
and the length of the call in minutes and seconds in the top
right-hand corner.
2. Press the desired numeric key (in example
-
The display shows the associated telephone number that
you stored (see "Setting one-touch and speed dialling",
chapter "Basic transmission and reception operations").
If you also associated a name with it, the display will show
this, too.
T
ELEPHONING WITH SPEED DIALLING
Do not place the original document in the ADF.
1. Lift the handset to engage the line.
or
to activate the handsfree function, press the key:
The display shows:
and the length of the call in minutes and seconds in the top
right-hand corner.
2. Press the key:
The display shows:
3. Type the desired speed dialling code, for example
. To do so, press the keys:
-
The display shows the stored telephone number (see
"Setting one-touch and speed dialling", chapter "Basic
transmission and reception operations").
If a name was also associated with it, the display will show
this, too.
Once the number has been dialled, if the correspondent is
free you can start talking.
):
Advertisement
Table of Contents
