Table of Contents
Advertisement
S
ETTING UP FOR LINE CHARACTERISTICS
C
ONNECTING TO A PUBLIC LINE
The fax machine is already set up to be connected to a
public line. Check, however, the following points:
•
The "PUBL.LINE (PSTN)" parameter is selected.
•
The dialling mode parameter (tone or pulse) is compatible
with the public telephone exchange line to which you have
connected the fax machine. If in doubt about the choice to
be made, ask your public telephone company.
1. Press the key
until the display shows:
2. Press the key:
The display shows:
3. Press the key:
The display shows:
If the fax machine is set up for connection to a private line,
select the "Private Line" connection setting.
4. To do so, press the key:
/
5. To confirm the selection, press the key:
The display shows:
6. To view the other dialling mode (in countries where it is
available), press the key:
/
7. To confirm the selection, press the key:
8. To return the fax machine to the stand-by mode, press the
key
C
ONNECTING TO A PRIVATE LINE
To connect the fax machine to a private line and be able to
use it also on a public line, proceed as follows:
•
Select the "PRIV.LINE (PBX)" parameter.
•
Set the same dialling mode (tone or pulse) as the one used
by the private telephone exchange that manages the line to
which you have connected the fax machine. If in doubt about
the choice to be made, ask the company that manages your
private telephone network.
•
Set the output mode (area code or flash) to access the
public telephone network from the private telephone network.
•
Set the same dialling mode (tone or pulse) as the one
used by the public telephone exchange.
8
(
)
PBX
1. Press the key
until the display shows:
2. Press the key:
The display shows:
3. Press the key:
The display shows:
4. To select the other options, press the key:
/
5. Press the key:
The display shows:
6. To select the other dialling mode, press the key:
/
7. To confirm the selection, press the key:
The display shows:
8. To select the other "EXT.LINE:FLASH" option, press the
key:
/
9. To confirm the selection, press the key:
If you confirmed, by pressing the key
"EXT.LINE:PREFIX" mode, the fax machine prompts you to
enter the number corresponding to the area code (max. 3
digits).
10. Press the key:
The display shows:
11. To select the other dialling mode, press the key:
/
12. To confirm the setting, press the key:
13. To return the fax machine to the initial stand-by mode, press
the key:
, the
Advertisement
Table of Contents
