Olivetti Fax-Lab 470 Instructions Manual page 23

T
RANSMITTING A DOCUMENT FROM THE MEMORY
1. Place the original document in the ADF.
The display shows on the top line:
and on the bottom line, the default contrast value: NORMAL.
The initial resolution value (even if it is not shown on the
display) is: " " (standard).
If you want, change the contrast and resolution values as
described previously.
2. Press the key
until the display shows:
3. Press the key:
The fax machine starts to store the original document. Once
saved, the display shows the message "DOC.N. XXXX" for
several seconds.
For example "16:50".
4. To do so, press the keys:
-
Confirm the entry or the current time.
5. To do so, press the key:
The display shows:
Dial your recipient's number in any of the available methods:
directly on the numeric keypad or using the one-touch keys
or speed dialling codes (see "Setting one-touch and
speed dialling").
6. To do so, press the keys:
-
7. Press the key:
The fax machine prompts you to enter another number:
If you want to send the document to more than one
correspondent, repeat the previous two steps for each extra
recipient.
8. To terminate the procedure, press the key:
9. If you want to send the document to one correspondent
only, simply press the key:
Once the procedure has been completed, the display shows:
N o t e
If there is a power failure, the transmission from the memory will
be cancelled.
P
ROGRAMMED TRANSMISSION FROM THE MEMORY
,
CHANGING REPEATING OR DELETING
1. Press the key:
until the display shows:
2. Press the key:
The display shows:
3. Press the key:
The display shows:
You can choose the following options:
PRINT SETTING? – To print the memory transmission
parameters only. When it has finished printing, the fax
machine returns automatically to its stand-by status.
CANCEL SETTING? - To cancel the setting. The fax machine
returns to its initial stand-by status.
CHANGE PARAM.? – To change the recipient's number or
the desired transmission time.
4. To select the other options, press the key:
/
5. To confirm the selection, press the key:
The display shows:
From this point on, proceed from Point No. 3 onwards of the
procedure in "Transmitting a document from the memory".
17