Table of Contents
Advertisement
P
REPARING THE DOCUMENT FOR TRANSMISSION
(
)
POLLING TRANSMISSION
1. Place the original document in the ADF.
The display shows on the top line:
and on the bottom line, the default contrast value: NORMAL.
The initial resolution value (even if it is not shown on the
display) is: "
" (standard).
If necessary, change the contrast and resolution values (see
"Setting contrast and resolution", chapter "Basic
transmission and reception operations").
2. Press the key:
until the display shows:
3. Twice press the key:
The second line of the display shows: "POLLING TX SET".
Note
You can delete the polling operation that has been set up.
1. Do so by removing the document from the ADF or by pressing the
key.
41
Advertisement
Table of Contents
