Connecting To The Telephone Line - Olivetti OFX 3200 Instruction Manual

In some countries the installation procedure is performed by the customer engineering service. To
install the machine yourself, follow the procedure described below.
WARNING: Check that the power cable is unplugged before connecting the machine to the
telephone line.
To connect the facsimile machine and a telephone to the telephone line, proceed as follows:
1. Connect one end of the telephone line connection cable to the line socket (LINE) on the
facsimile machine, and the other end to the wall telephone socket (see "case 1" or "case 2"
figure).
Note: if the network to which the facsimile machine is connected has more than one socket
connected in series, the facsimile machine must be connected to the primary socket.
2. Make the telephone connection (if available) in either of the following ways:
a) if the telephone line connection cable provided with the facsimile machine has an extension
plug (with socket): plug the telephone cord into the extension plug (with socket), (see "case
1" figure).
b) if the telephone line connection cable provided with the facsimile machine does not have
an extension plug (with socket): connect the telephone cord's "miniature" connector
directly to the connection socket (TEL1), removing the plastic cap, if fitted (see "case 2"
figure).

CONNECTING TO THE TELEPHONE LINE

5