Olivetti Fax-Lab 470 Instructions Manual page 41

4. Press the key
until the display shows:
You can choose the following options: "SILENT
RX:ALWAYS" or "SILENT RX: DAILY".
5. To do so, press the key:
/
6. To confirm the selection, press the key:
7. To return the fax machine to the stand-by mode, press the
key:
Note
The daily silent reception setting ("SILENT RX: DAILY") is cancelled
by a power failure.
D
ISPLAYING CALLER ID
This function, which may be activated by the telephone
company on request by the user, is only available in some
countries and conforms to the ETSI ETS 300 778-1
standard.
This function tells you immediately who is calling. In this
way, you will be able to decide in advance whether to answer
the call or not.
If the fax machine is in stand-by mode, whenever a call is
received, one of the following items of information id
always shown when this function is enabled:
• Number or name of the caller;
• PRIVATE: if the correspondent has chosen not to reveal
his identity to you;
• NOT AVAILABLE: if the correspondent is connected to a
telephone exchange that does not support this service.
If you are programming your fax machine and, when an
incoming call is received, want to know who is calling you,
you must press the
It may however happen, if you are connected to a particular
kind of telephone network, that the number of the caller is
not displayed on the fax machine. If this occurs, contact
technical support for your country.
The fax machine is set up to display the caller ID. You
may however set it up not to display it, as follows:
1. Press the key
until the display shows:
2. Press the key:
The display shows:
3. Press the key:
The display shows:
key before answering the call.
4. Press the key
until the display shows:
5. To select the "CALLER ID: OFF" option, press the key:
/
6. To confirm the selection, press the key:
7. To return the fax machine to the stand-by mode, press the
key:
Note
If there is a power failure, the stored date and time are lost. if this
function is enabled, the first incoming call restores the date and time.
C
HANGING NUMBER OF RINGS
This function is only enabled in some countries.
When the fax machine is set up for PHONE/FAX or
TAD/FAX reception mode, when an incoming call is received,
the fax machine automatically recognizes, after two rings,
whether the call is being made from another fax machine
(FAX) or a telephone (TEL).
You can change the number of rings as follows:
1. Press the key
until the display shows:
2. Press the key
until the display shows:
You can choose between the following values: "01", "04",
"06", "07" and "08".
3. To do so, press the key:
/
4. To confirm the selection, press the key:
5. To return the fax machine to the stand-by mode, press the
key:
R :
ING VOLUME CHANGING
1. Press the key
until the display shows:
2. Press the key:
The display shows:
35