7. To return the fax machine to the stand-by mode, press the
key:
Choose the type of contrast on the basis of the following criteria:
•
NORMAL, if the document is neither too light nor too dark.
NORMAL appears on the bottom line of the display.
•
LIGHT, if the document is excessively dark. LIGHT appears on
the bottom line of the display.
•
DARK, if the document is excessively light. DARK appears on the
bottom line of the display.
T
O SET THE RESOLUTION
1. Press the key:
until the desired value appears on the display.
Choose the resolution on the basis of the following
criteria:
•
STD (STANDARD) if the original contains easily readable
characters. An arrow appears on the bottom line of the
display in line with the "
•
FINE if the original contains very small characters or
diagrams. An arrow appears on the bottom line of the
display in line with the "
•
HALF TONES, if the document contains shaded areas.
An arrow in line with the "
with the "
" symbol printed on the console appear on the
bottom line of the display.
T
RANSMITTING AN ORIGINAL
1. Place the original document in the ADF.
The display shows on the top line:
and on the bottom line, the default contrast value: NORMAL.
The initial resolution value (even if not shown on the display)
is: "
" (standard).
If desired, change the contrast and resolution values as
described previously.
2. To select the recipient number, press the keys:
-
The recipient's number may contain a maximum of 64 digits.
3. To start transmitting, press the key:
If the document is transmitted correctly, once this operation
has been completed, the display will show the message "TX
COMPLETED" for a few seconds.
Comment
If you have entered any incorrect digits: position the cursor, using the
|/} keys, to the incorrect digit and overwrite it with the correct one. If
you want to delete the number altogether, press the
14
" symbol on the console.
" symbol on the console.
" symbol and an arrow in line
key.
N o t e
If you want you can dial the recipient's number using the quick dialling
procedures, see "Setting one-touch and speed dialling", "Sending
with one-touch dialling" and "Sending with speed dialling".
Note
To abort the current transmission, press the key
machine ejects the document from the ADF and returns to the stand-
by mode.
If the document to be removed consists of more than one sheet, before
pressing
to eject the first, remove all the others by hand.
T
O TRANSMIT AND HEAR THE DIALLING TONES
1. Place the original document in the ADF.
The display shows on the top line:
and on the bottom line, the default contrast value: NORMAL.
The initial resolution value (even if it is not shown on the
display) is: "
" (standard).
If you want, change the contrast and resolution values as
described previously.
2. If you want to hear the dialling tone, press the key:
The display shows:
And the length of the transmission in minutes and seconds
in the top right-hand corner.
3. To select the recipient number, press the keys:
-
The recipient's number may contain a maximum of 64 digits.
4. As soon as you hear the tone of the recipient's fax machine,
press the key:
Transmission
commences
"CONNECTING" appears on the display.
If the document is sent correctly, once this operation has
been completed, the display will show the message "TX
COMPLETED" for a few seconds.
F
,
OR TRANSMISSION
LIFT THE HANDSET
1. Place the original document in the ADF.
The display shows on the top line:
and on the bottom line, the default contrast value: NORMAL.
The initial resolution value (even if it is not shown on the
display) is: "
" (standard).
If you want, change the contrast and resolution values as
described previously.
. The fax
and
the
message