Olivetti Copia 9021 Instructions Manual page 44

Table of Contents

Advertisement

Removing Jammed Staples
If staples get jammed, the manual stapling key (F3) blinks. To eliminate the jam, follow the procedure described
below:
Remove the stapler unit as described
previously in «Replacing the staple
cartridge» (p. 38),
Remove any jammed staples.
Technical Characteristics
Paper:
Capacity per bin:
Non-sorter mode
Sorter mode
Group mode
Stapler-sorter mode
Max. power consumption:
Dimensions (mm):
Weight:
Grip the stapler unit and lift it.
Return the metal plate to its original
position, making sure that it is held in
place by the green catch.
From 64 to 80 g/m
2
Top tray
From 1st to 10th bin
From 1st to 10th bin
From 1st to 10th bin
40 W
Length 333, Width 576, Height 358
approximately 9 kg
With your thumb, push catch 1 (gre-
en) down and, with your index finger,
pull metal plate 2 out until it locks.
Close the stapler unit carefully, push
it into its compartment until it locks
into position and close the panel.
all sizes
100 sheets
A4 or A5
30 sheets
A3
10 sheets
A4 or A5
20 sheets
A3
10 sheets
A4 or A5
20 sheets
A3
10 sheets
OPTIONAL DEVICES
OPTIONAL DEVICES
OPTIONAL DEVICES
OPTIONAL DEVICES
OPTIONAL DEVICES
39

Advertisement

Table of Contents
loading

Table of Contents