Table of Contents
Advertisement
01)
Auto clear time
When the photocopier is switched on and no key is pressed within a given period of time, the standard copy
settings are restored automatically. This period of time, which is called «auto clear time» and is set initially to 2
minutes, can be changed.
Having selected the function as described previously, the display (B12) shows the numeric value currently in
use (preceded by the – sign).
Set the desired auto clear time (from 1 to 9 minutes, in 1-minute steps) using the NUMERIC keys (B40) and press
the OK key (B13) to confirm your choice.
•
Incorrect entries can be corrected by pressing the numeric key corresponding to the desired value, which will
take the place of the previous one, or the CLEAR (B39) to clear the display.
•
To abort the new setting and restore the standard setting, press the RESET key (B34) before pressing the OK
key (B13) to confirm your selection.
•
To disable this function, set the value of 0 minutes.
02)
Auto power-off time
When the photocopier is ON and no key is pressed for a certain period of time the ENERGY SAVING key (B36)
is automatically enabled which shows that the machine is in standby state. This period of time, which is called the
«auto power-off time» and is set initially to 5 minutes, can be changed.
•
There are seven values available for the auto power-off time:
1
2
3
4
5
6
7
120 minutes
Once the function has been selected as described above, the display (B12) will show the number of the setting
currently in use (preceded by the sign –).
Set the desired auto power-off time (from 1 to 7) using the NUMERIC keys (B40) and press the OK key (B13)
to confirm your choice.
•
Incorrect entries can be corrected by pressing the numeric key corresponding to the desired value, which will
take the place of the previous one, or the CLEAR key (B39) to clear the display.
•
To abort the new setting and restore the standard setting, press the RESET key (B34) before pressing the OK
key (B13) to confirm your selection.
•
To disable this function, contact your nearest OLIVETTI service centre.
03)
Fine zoom adjustment
If you notice a slight difference in size between the original and the copy when working in 1:1 copying mode, use
this function to correct the error. Adjustments can be made up to
(Y).
Once the function has been selected as described above, the display (B12) will show the value –1, which
indicates that the function can be adjusted horizontally (X).
20
ADDITIONAL FUNCTIONS
ADDITIONAL FUNCTIONS
ADDITIONAL FUNCTIONS
ADDITIONAL FUNCTIONS
ADDITIONAL FUNCTIONS
2 minutes
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
±
1% in 0.2% steps, both horizontally (X) and vertically
Advertisement
Table of Contents
