Table of Contents
Advertisement
b) 2 to 1/2
This function enables you to reduce four originals and copy them onto both sides of one sheet of paper.
To set image combination mode to 2 to 1/2, press the IMAGE COMBINATION/SEPARATION key (B18) until
the
icon is selected and remains on.
Place the originals in the ADF or RDF and specify the desired number of copies. Now specify the number of
originals.
To enable automatic original count, check that the
MODE key (B5) until it appears.
•
If an ADF is fitted, be sure to eliminate any folded corners from the sheets after the automatic count has been
made, pick them up from the original tray (D4) and rearrange them for copying.
To disable the automatic count, to speed up copying and reduce the risk of damage to sheets caused by them
being fed into the machine several times, you may indicate whether the original has an even or odd number of pages.
Press the left TWO-SIDED MODE key (B5) until the
number) appears.
Press the PAPER SELECT key (B28) until the desired size is indicated by the paper select indicator (B29).
•
When working in image combination mode, automatic paper selection is not available: you must select the paper
manually.
•
The photocopier automatically selects the correct copy ratio according to the selected paper size (
zoom», p. 15).
Proceed to make copies in the normal way.
Having finished making copies, press the IMAGE COMBINATION/SEPARATION key (B18) until no icon is
selected or press the RESET key (B34) to exit from image combination mode and restore the standard copy
settings.
icon is selected; if it is not, press the left TWO-SIDED
icon (even number) or
icon (odd
«Auto
17
SPECIAL FEATURES
SPECIAL FEATURES
SPECIAL FEATURES
SPECIAL FEATURES
SPECIAL FEATURES
Advertisement
Table of Contents
