Olivetti Copia 9021 Instructions Manual page 28

Once the function has been selected as indicated above, the display (B12) will show the number –1, which
indicates that the photocopier is ready to store the settings made as the standard copy settings.
Store or restore the standard copy settings by pressing the NUMERIC key (B40) that corresponds to your choice
(1 = store; 0 = restore). Then press the OK key (B13) to confirm your choice.
•
Incorrect entries can be corrected by pressing the numeric key that corresponds to the desired value, which will
overwrite the incorrect one, or the CLEAR key (B39) to clear the display.
•
To cancel the new setting and restore the standard setting, press the RESET key (B34) before pressing the OK
key (B13) to confirm your choice.
00) Restoring the Standard Copy Settings
All changes made to functions 01 to 08 can be cancelled by restoring the standard copy settings (those made
at the factory).
Having selected the function as described above, the display (B12) shows the value –1.
Enter 0 (zero) on the NUMERIC keys (B40) and press the OK key (B13) to confirm your choice.
•
To cancel the restore operation and keep the changed settings, press the RESET key (B34) before pressing the
OK key (B13) to confirm your choice.
23
ADDITIONAL FUNCTIONS ADDITIONAL FUNCTIONS ADDITIONAL FUNCTIONS ADDITIONAL FUNCTIONS ADDITIONAL FUNCTIONS