Table of Contents
Advertisement
TRANSP
TRANSPARENCY INTERLEA
TRANSP
ARENCY INTERLEA
ARENCY INTERLEAVING MODE
ARENCY INTERLEA
TRANSP
TRANSP
ARENCY INTERLEA
When copying onto transparencies inserted in the stack bypass (A7), the photocopier can automatically insert
a sheet of paper between two transparencies. The sheets inserted can be printed with the same images as the
transparencies or left blank.
•
In transparency interleaving mode, it is not possible to make more than one set of copies at a time, even if the
photocopier is fitted with an optional sorter.
•
Transparency interleaving mode can also be used in two-sided mode copying from 2 to 1 side (
mode», p. 13).
To enter transparency interleaving mode, place the originals on the glass platen or in the optional ADF or RDF
and press the TRANSPARENCY INTERLEAVING key (B17) until the
icon (printed sheets) appears: the selected icon starts to blink.
Place the originals in the stack bypass (A7) and adjust the guides to fit their size (A4 and A4R are available).
Press the PAPER SELECT key (B28) to select the size of the transparencies and confirm by pressing the OK
key (B13). The
or
Proceed to make copies in the normal way.
•
The copy is printed with a separating sheet inserted before each transparency.
When you have finished making copies, press the TRANSPARENCY INTERLEAVING key (B17) until no icon
is selected or press the RESET key (B34) to exit from transparency interleaving mode and restore the standard
copy settings.
18
SPECIAL FEATURES
SPECIAL FEATURES
SPECIAL FEATURES
SPECIAL FEATURES
SPECIAL FEATURES
VING MODE
VING MODE
VING MODE
VING MODE
icon stops blinking and remains on.
«Two-sided
icon (blank sheets) or the
Advertisement
Table of Contents
