Using The Stack Bypass; Interrupting A Copy Job (For Urgent Copies) - Olivetti Copia 9021 Instructions Manual

USING USING THE ST THE STA A A A A CK BYP THE ST CK BYP CK BYP
USING USING USING THE ST THE ST CK BYP CK BYPASS
The stack bypass, located on the right-hand side of the photocopier (A7), holds up to 50 sheets, which the
photocopier automatically feeds in for copying. The stack bypass should be used when you want to copy onto
special paper, such as transparencies, cards, headed paper, labels or paper that does not fit the cassette.
Insert the paper in the stack bypass as shown below:
Open the stack bypass and, if neces-
sary (i.e. for A4R or A3 size originals)
remove the auxiliary tray.
•
If you want the machine to take the paper from the stack bypass automatically, you must set the paper
size before starting to make the copies (
Having placed the original on the glass platen or on the optional ADF or RDF, press the PAPER SELECT key
(B28) until the stack bypass icon appears on the paper out/jam indicator (B27), then proceed to make copies
in the normal way.
•
If you use the stack bypass in any of the following modes:
– Two-sided copying
– Image separation onto two pages
– Transparency interleaving
and do not select the paper size beforehand, the paper select indicator (B29) will start to blink. Press the PAPER
SELECT key (B28) until the desired paper size is indicated or, if the size of the paper in the stack bypass is
different from all those indicated, until the indicator goes off. Then confirm by pressing the OK key (B13).
INTERR INTERRUPTING INTERR INTERR INTERR UPTING UPTING UPTING A COPY JOB (FOR URGENT COPIES) UPTING A COPY JOB (FOR URGENT COPIES) A COPY JOB (FOR URGENT COPIES) A COPY JOB (FOR URGENT COPIES) A COPY JOB (FOR URGENT COPIES)
This function enables you to interrupt the copying cycle in progress for the time necessary to make other, more
urgent copies. When you have finished making your priority copies, the machine will resume the original copying
cycle from the point where it left off.
•
When the machine enters interrupt mode, neither the optional ADF or RDF may be used; place the documents
on the glass platen manually. Also the functions linked to the IMAGE COMBINATION/SEPARATION key (B18),
the TRANSPARENCY INTERLEAVING key (B17) and the SORTER (B15) are not available. The automatic
restore and auto control off functions are also disactivated.
ASS ASS
ASS ASS
Adjust the paper guides to fit the desi-
red size.
«Setting the size for the stack bypass», pages 19 and 21).
Insert the sheets by placing them on
the stack bypass tray with the side on
which you want the copy to appear
facing up.
BASIC COPYING BASIC COPYING BASIC COPYING
BASIC COPYING BASIC COPYING
maximum
level
11