Routing The Cord Through The Backplate - AT&T MERLIN LEGEND Release 3.0 Installation Manual

Assembling MLX Telephones
Figure 3-38. Routing the Cord Through the Backplate
f Plug the free end of
telephone. Route the
Figure 3-38.
Position the telephone on the mounting plate studs and then slide the
g
telephone down to lock it in place.
and off.
8 Label the button assignment card.
a Pull the tab at the top of the plastic cover toward you.
3-56 Installing Telephones and Adjuncts
D8W
the cord into the LINE jack on the back of the
cord through the cord channel above the jack. See
To remove the telephone, slide it up
Mounting
Plate
6306