Video Conferencing Data Stations - AT&T MERLIN LEGEND Release 3.0 Installation Manual

Video Conferencing Data Stations

Video Conferencing Data Stations
You can use the 7500B data module with a Multipurpose Enhancement Board
for synchronous data communication. This type of station allows data
transmission at speeds of 56 or 64 kbps.
This section is only a guideline for connecting video conferencing equipment
to the system. For additional information, refer to the documentation
packaged with the video codec.
Also, for instructions on using the Multipurpose Enhancement Board or for
additional information on setting up the 75006 data module, see the
documentation packaged with the 75006 data module.
You need the following hardware:
008 MLX module or 408 GS/LS-MLX module and a 100D module in the
control unit
ACCULINK 3150 CSU
Two 7500B data modules with two 7500B data module feature
package 2 upgrades (user manuals included)
Two Multipurpose Enhancement Boards [install one of these in each
7500B data module for synchronous communication and an RS-366
Automatic Calling Unit (ACU) interface]
Two WP901 10-L7 power supplies (one per stand-alone 7500B)
Two 440A4 terminating resisting adapters
Z77A multiple mounting (mounting for multiple 7500B data modules)
PictureTel video codec unit
Two Shore Microsystems SM-100EIA-232/V.35 converters (or
equivalent)
6-16 Connecting Data Equipment