AT&T MERLIN LEGEND Release 3.0 Installation Manual page 352

Error Logs
Table 2-2. Error Codes
Error
Codes Description
000l TIMEOUT COLD START:
System programming is okay.
POWER UP WARM START:
0002
System programming is okay.
0003 SOFTWARE COLD START:
System programming is okay.
0004
SOFTWARE WARM START:
System programming is okay.
O006 INCOMPLETE COLD START:
System was cold-started while a
restart was in progress.
SANITY TIMEOUT RESET:
0007
Faulty software, module, carrier, or
processor sanity timer.
MAX RESET COUNT EXCEEDED:
0008
System was cold-started (System
Reset) because too many warm starts
occurred.
System programming is okay.
2-6 Error Logs, Access Logs, and System Inventory
Action
No action required; however, if problem
persists, troubleshoot the processor.
No action required; however, if problem
persists, troubleshoot the processor.
If problem persists, troubleshoot the
processor.
If problem persists, troubleshoot the
processor.
If problem persists, troubleshoot the
processor.
Troubleshoot module and or processor.
If problem persists, troubleshoot the
processor.
Continued on next page