AT&T MERLIN LEGEND Release 3.0 Installation Manual page 497

Checking Ports
Console Display/Instructions
4 Select Audit Line.
B-Channel xxxx:
Make a selection
Audit Line
Call
Audit
Exit
The screen below appears only if the audit message is successfully created
and sent.
BChannel xxxx Audit Line
Audit Initiated
Exit
After about four minutes, check the error logs.
If new PRI errors occur, contact your technical
help on interpreting the results and your action.
If no new PRI messages appear, the ends are most likely in
agreement.
The screen below appears when
signaling failure.
BChannel xxxx Audit Line
Audit Failed
Exit
Additional Information
xxxx = slot and port number entered
in
Step 3.
xxxx = slot and port number entered
in Step 3.
the message cannot be sent due to
xxxx =
slot and port number entered
in Step 3.
Central Office Problems 5-27
support organization for
PC
(F1)