AT&T MERLIN LEGEND Release 3.0 Installation Manual page 405

Processor Problems
Missing Card or Card Not Inserted Correctly
Upgrade/Installation
Verify that Memory Card
has been installed
correctly.
Exit
Insert the memory card correctly; then select
installation procedure again.
Memory Card Is Wrong Type
Upgrade/Installation
Memory Card is not the
correct type.
Remove and insert MERLIN
LEGEND Upgrade or
Installation Memory Card
Exit
Select and repeat the forced installation procedure with a new memory
Exit
card.
NOTE:
Forced installation can be performed successfully with an upgrade memory
card only if the installation is performed through the maintenance screens.
Memory Card Is Corrupt
Upgrade/Installation
Information on the
Memory Card is corrupted,
Please remove the Memory
Card.
Exit
Select and repeat the forced installation procedure with a new memory
Exit
card.
and begin the forced
Exit
Control Unit Problems 4-27