Dialing Speed Dial Numbers - Altigen AltiAgent Manual

• If you click Yes, AltiAgent inserts the trunk access code ("9") and long
distance number ("1") automatically.
• If you click No, AltiAgent dials this number out directly, and "7" is
treated as an IP trunk access code.
If the number you dialed is shorter than 10 digits (3-digit area code + 7-digit
number), AltiAgent sees the "7" as an IP trunk number, and dials this
number out directly.
Each time you answer the question Is "710" an area code? the result is
recorded in a text file, AreaPrefix.txt, so that AltiAgent will not have
to ask you again about that number. If you want to remove the number,
open the file, delete the number, then restart AltiAgent. The typical address
for the file is: c:\program files\AltiGen\AltiAgent\AreaPrefix.txt.

Dialing Speed Dial Numbers

To dial Speed Dial numbers, click the
the Speed Dial tab:
This tab lists Station Speed Dial numbers that you have configured in
AltiAgent, and it lists System Speed Dial numbers, if any, that have been
set up for your extension by the system administrator. You can see in the
Type column which numbers are station numbers and which are system
numbers.
To call a speed dial number, double-click the row of the number you want
to call, or single-click the row in the Type column.
See "To add or edit station speed dial numbers" on page 61 for details on
setting up speed dial numbers.
Redialing
To redial the last number called, click the Redial button.
24 AltiAgent Manual
button, and then click