Table of Contents
Advertisement
Configuration
12. Highlight the Case Sensitive field and press
13. Highlight the field beside Time Out, and press
14. Select OK and press
Actions 1 Tab Settings
The DVR can be set to react to text input. Text input can:
•
•
•
•
•
•
Highlight the Actions 1 tab. The Text-In Actions 1 screen displays.
Selecting a Camera or Cameras for Recording
You can set the DVR to start recording video from all the associated cameras when the
DVR detects text input on the selected cameras.
1.
98
Refer to the device manufacturer's documentation for text strings that the device
sends during transactions, so you know which ones you do not want recorded.
Refer to the device manufacturer's documentation to determine if the text strings
are Case Sensitive. If the device distinguishes between upper and lower case
letters, make certain the Case Sensitive field is turned On.
for the new text string. The DVR considers a transaction complete if no new text
strings are entered between the last text input and the dwell time out. You can
adjust the Time Out dwell from 5 seconds to 15 minutes.
Be associated with cameras
Trigger an Alarm-Out connector
Sound the internal buzzer of the DVR
Notify a number of different devices
Move PTZ cameras to preset positions
And/or display a camera on a SPOT monitor
Figure 3-72
Text-In Actions 1 Screen
Highlight the desired field under the Record heading, and press
cameras appears.
to save settings.
to toggle between On and Off.
. Set the length of time to wait
. A list of
Advertisement
Table of Contents
