Figure 3-73 Text-In Actions 1 Screen - Honeywell HRXD9 User Manual

Configuration
16. Highlight the box under the Record heading and press
17. Highlight the box under the Alarm-Out heading and press
18. Highlight the box under the Notify heading and press
88
Figure 3-73
The DVR can be set to react to text input. Text input can be associated with
cameras, trigger an Alarm-Out connector, sound the DVR's internal buzzer, notify
a number of different devices, move PTZ cameras to preset positions, and/or
display a camera on a SPOT monitor.
appears. You can associate as many cameras with the Text Input as you wish. If
the DVR detects text input, it starts recording video from all the associated
cameras.
Note For the Record action, the camera(s) you select should be set to
the Event or Time & Event recording mode in the Record
Schedule setup screen.
Outputs appears. You can associate as many Alarm-Outs with the Text Input as
you wish. When the DVR detects text input, it triggers output signals on all the
associated Alarm-Out connectors. You can also have the DVR's internal buzzer
sound if text input is detected.
Note For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen,
Schedule tab (see
entire list On and Off by highlighting Notification and pressing
toggle the individual items On and Off by highlighting that item and pressing
Highlight OK and press
Text-In Actions 1 Screen
Alarm-Out
to accept your changes.
. A list of cameras
. A list of Alarm
Screen, page 65).
. You can toggle the
. You can
.