Figure 3-72 Text-In Actions 1 Screen - Honeywell HRXD9 User Manual

Configuration
Highlight the box beside Transaction End, and press
enter the Transaction End string. Refer to the device manufacturer's documentation for
the text string that the device sends when a transaction ends.
Highlight the more line(s) box, and press
text that you want the DVR to record. You can choose from 0 to 10.
Highlight the box beside Line Delimiter, and press
enter the character(s) that the device uses to indicate the end of a line. Special
characters can be created using ^ and a capital letter; for example, ^J for NL (New
Line), ^M for CR (Carriage Return). Refer to the device manufacturer's documentation
for Line Delimiter character(s).
Highlight the box beside Ignore String, and press
any strings of text that you want the DVR to ignore. Refer to the device manufacturer's
documentation for text strings that the device sends during transactions, so you will
know which ones you do not want recorded.
Highlight the Case Sensitive box, and press
to the device manufacturer's documentation to determine if the text strings are Case
Sensitive. If the device distinguishes between upper and lower case letters, make
certain the Case Sensitive box is turned On.
Highlight the Actions 1 and Actions 2 tabs and the Text-In Actions 1 and Actions 2
screens display.
The DVR can be set to react to text input. Text input can be associated with cameras,
trigger an Alarm-Out connector, sound the DVR's internal buzzer, notify a number of
different devices, move PTZ cameras to preset positions, and/or display a camera on a
SPOT monitor.
Rev 1.00
Note If Any Character is turned On, you will not be able to enter any
text in the Transaction Start box.
Figure 3-72 Text-In Actions 1 Screen
. Select the number of additional lines of
. Use the virtual keyboard to enter
to toggle between On and Off. Refer
72
. Use the virtual keyboard to
. Use the virtual keyboard to
Document 900.0856
12/06