Logical Processing Commands That Have Test Parameters; Commands That Define Criteria And Constants; Table Command - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Using logical processing

Logical processing commands that have TEST parameters

Commands that define criteria and constants

Table 3-1. Summary of commands that define logical criteria and constants
Command
TABLE
CRITERIA

TABLE command

3-4
The logical processing commands with TEST parameters are
listed below. Each individual command should be specified only
once per job descriptor entry. If any one command is specified
more than once, the last occurrence is used without notification
of any error.
• BANNER
• RAUX
• RDELETE
• RFEED
• ROFFSET
• RPAGE
• RRESUME
• RSELECT
• RSTACK
• RSUSPEND
The following table summarizes the commands that define
constants that can be specified in logical processing commands.
Function
Builds a table of constants against which input data fields are checked
to determine if a logical processing function will be performed.
Specifies criteria for testing data records against constants or values.
The TABLE command builds a table of constants, which can be
referenced by logical processing commands. (TABLE is the first
command discussed in this section because it is usually coded
before the other types of commands that are related to logical
processing.)
Using LCDS Print Description Language