Route Command; Route Command Parameters - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Example 2
Example 3

ROUTE command

Table 4-87. Summary of ROUTE command parameters
Parameter
ROUTE RFORM
ROUTE RTEXT
Using LCDS Print Description Language
The following is an example of multiple BEGINs. Two logical
pages are defined on one physical page.
2UP: PDE
This is an example of a PDE that may be compiled separately
from a JDL. The compilation process creates a .PDE object file,
which may be referenced from within a JDL or by a DJDE. The
name of the object file for this PDE is PDE99.PDE (the same as
its identifier in the source command shown below).
PDE99: PDE
END;
The ROUTE command allows you to print identifying information
(text and an optional form) on a page preceding a report. You
may code this command within a JDL or in a disk file of ROUTE
commands.

ROUTE command parameters

The following table summarizes the ROUTE command
parameters.
Specifies
Specifies a form that will be printed with RTEXT
pages.
Specifies the text that will be printed preceding a
report copy.
The following sections describe the syntax of the ROUTE
command parameters and explain the parameter options.
Specifying print format parameters
BEGIN=(.5 IN,.5 IN),
BEGIN=(6.5IN,.5 IN),
PMODE=PORTRAIT,
FONTS=P1012B;
PMODE=PORTRAIT,
BEGIN=(.10,0),
FONTS=(P07ITA,P08OAA);
Online Offline DJDE
Y Y Y
Y Y Y
4-101