Xshift Djde - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Using Dynamic Job Descriptor Entries (DJDEs)

XSHIFT DJDE

Type
Syntax
Options
Option
v
1
v
2
YES
NO
5-74
Specifies whether the image of the form and data on a page is to
be shifted, and if so, by what values. This DJDE shifts the data
downward (in the x direction) for short edge binding, because a
long edge feed page is viewed in portrait mode. It is typically
used to accommodate top drilled paper, binding, finishing, and
edgemarking.
Page oriented
XSHIFT = {YES | NO | (v
Table 5-64. XSHIFT DJDE options and definitions
Definition
value 1
An integer value in dots for the amount of shift on the simplex page or the odd
(front) side of the duplex page. (Each dot is 1/300 of an inch.)
The range for v is –75 to 75.
1
value 2
A value in dots for the amount of shift on the even (back) side of a duplex page.
The range for v is –75 to 75.
2
Specifies that a shift occurs. A standard size shift occurs if YES is specified
(v =75 and v = 75).
1 2
Specifies that no shift occurs (v
, v )}
1 2
=0 and v =0).
1 2
Using LCDS Print Description Language